Web GUI : Adding trunks with inbound and outbound routes

English Installation/Configuration
10

If you’ve actually read this far, congratulations, you are a patient person. :slight_smile:
So the issues were multiple in my case.

  1. In the Trunk setup, I had listed as my Host, the IP address of the Wazo server when in fact that is supposed to be the IP addres / FQDN of the trunk provider
  2. In the Trunk setup, I had used teh UserName/Password of the endpoint on the Wazo server when you are supposed to use the UserName/Password of the trunk provider
  3. In the Trunk setup - Register (tab) I had not entered a callback Extension and you are supposed to put the DID in there
  4. In the Trunk setup - Options, for my trunk provider, I had to add:
    • fromuser: username provided by trunk provider
    • fromdoman: the domain of the trunk provider

The NAT settings can be left as nat=force_rport,comedia and Wazo will translate as required to pjsip labels

All is now working

Now to finish with groups, scheduling, paging, … and document and share the document (in my spare time)

Thank you VERY MUCH to all who helped

1 Like