No Inbound and Outbound calls - trunk connected

[Sven]

Update:

Web GUI : Adding trunks with inbound and outbound routes

If you’ve actually read this far, congratulations, you are a patient person. So the issues were multiple in my case. In the Trunk setup, I had listed as my Host, the IP address of the Wazo server when in fact that is supposed to be the IP addres / FQDN of the trunk provider In the Trunk setup, I had used teh UserName/Password of the endpoint on the Wazo server when you are supposed to use the UserName/Password of the trunk provider In the Trunk setup - Register (tab) I had not…

I copied the settings but it did not resolve the issue.

I messed with the extensions, outcalls work now. It seems like the 0. extension does not fire for some reason.

I still dont get incalls, but they dont even register on the PBX, so I suspect, the incoming connection is broken rather than the routing within the PBX.