# Trunck Sip Multi-tenant

**URL:** <https://wazo-platform.discourse.group/t/trunck-sip-multi-tenant/511>\
**Category:** English\
**Created:** [July 30, 2020, 12:09pm UTC](https://wazo-platform.discourse.group/t/trunck-sip-multi-tenant/511 "2020-07-30T12:09:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nicolas56](https://yyz2.discourse-cdn.com/free1/user_avatar/wazo-platform.discourse.group/nicolas56/32/17_2.png) [@Nicolas56](https://wazo-platform.discourse.group/u/Nicolas56)\
**Post date:** [July 30, 2020, 12:09pm UTC](https://wazo-platform.discourse.group/t/trunck-sip-multi-tenant/511/1 "2020-07-30T12:09:34Z")

</div>

Hello,

On hosting a Wazo on an OVH server for tests.

I am putting two TENANTS on it for testing.

I have two SIP truncks registered on it. 1 for each “TETANT”.

The TENANT 1 receives and sends the calls from its trunck.

TENANT 2 does send calls from its trunck, but incoming calls go directly to TENANT 1 while in the context of TENANT 2, the number is well informed.

Do you have an idea?

Thank you.

---

<div class="post-metadata">

**Author:** ![Ramblin](https://yyz2.discourse-cdn.com/free1/user_avatar/wazo-platform.discourse.group/ramblin/32/34_2.png) [@Ramblin](https://wazo-platform.discourse.group/u/Ramblin)\
**Post date:** [August 2, 2020, 10:44am UTC](https://wazo-platform.discourse.group/t/trunck-sip-multi-tenant/511/2 "2020-08-02T10:44:44Z")

</div>

See

> [@First trunk always used for Incall from same provider](https://wazo-platform.discourse.group/t/first-trunk-always-used-for-incall-from-same-provider/419):
>
> Previously posted in Mattermost at [https://mm.wazo.community/wazo-platform/pl/oy7s3rghktb5zday35rqjewx6e](https://mm.wazo.community/wazo-platform/pl/oy7s3rghktb5zday35rqjewx6e) but is likely a better topic for the forum so posting here. Also related to forum post at but that was specific to a two-tenant situation and this is more generic. Is there a setting I can put into SIP\_General settings or the Trunk Options or ??? that would force use of the actual trunk / channel called (Incall) when I have mutliple trunks from the same provider? I believe this is is a…

Does this relate to your question?

If so, it is a known issue with Asterisk and some solutions suggested in plain Asterisk, but so far there has not been a solution presented for Wazo.
