# Star Codes / Blind Transfer stopped working

**URL:** <https://wazo-platform.discourse.group/t/star-codes-blind-transfer-stopped-working/1515>\
**Category:** Installation/Configuration\
**Created:** [July 1, 2024, 11:05pm UTC](https://wazo-platform.discourse.group/t/star-codes-blind-transfer-stopped-working/1515 "2024-07-01T23:05:37Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Ramblin](https://yyz2.discourse-cdn.com/free1/user_avatar/wazo-platform.discourse.group/ramblin/32/34_2.png) [@Ramblin](https://wazo-platform.discourse.group/u/Ramblin)\
**Post date:** [July 3, 2024, 6:10pm UTC](https://wazo-platform.discourse.group/t/star-codes-blind-transfer-stopped-working/1515/3 "2024-07-03T18:10:10Z")

</div>

@quintana

I use star codes to initiate recording of a call and to Park/Pickup an inbound call.

The complication is that the inbound call goes to a group and then one of the group picks up the call, so when I go to Park it or Pick it up (so someone else can take the call) the system does not pass on the function codes reqquired to enable the use of star codes.

I do not use a queue in the traditional sense. I send calls to a group (all phones in the house) and whoever picks of the call gets it.

You and I exchanged posts about this at

> [@Enabling star codes with Inbound calls going to a Group](https://wazo-platform.discourse.group/t/enabling-star-codes-with-inbound-calls-going-to-a-group/365):
>
> I need help figuring out how to enable use of a star-code to transfer an inbound call directed to a Group to a Parking Lot, once it has been answered by a User who is a member of that Group. I was previously helped by @sduthil to add the tT Call Options to the DialPlan so I could use a star-code (I use blind transfer) to transfer a call I was on to the Parking Lot. I tested the recommended solution and it worked so I documented it at [Keystroke / Softkey setting to send call to Parking Lot](https://wazo-platform.discourse.group/t/keystroke-softkey-setting-to-send-call-to-parking-lot/190/4) . A…

and with your help I got the system working.

I added t (lowercase, NOT uppercase) to the group dialplan as instructed in that post.

It has been working for quite a while now, but apparently something has changed, since it stopped working after a recent Wazo upgrade.

If you want more information, please let me know.

---

_[View the full topic](https://wazo-platform.discourse.group/t/star-codes-blind-transfer-stopped-working/1515)._