# No Inbound and Outbound calls - trunk connected

**URL:** <https://wazo-platform.discourse.group/t/no-inbound-and-outbound-calls-trunk-connected/282>\
**Category:** Installation/Configuration\
**Created:** [March 30, 2020, 7:07pm UTC](https://wazo-platform.discourse.group/t/no-inbound-and-outbound-calls-trunk-connected/282 "2020-03-30T19:07:22Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sven](https://yyz2.discourse-cdn.com/free1/user_avatar/wazo-platform.discourse.group/sven/32/326_2.png) [@Sven](https://wazo-platform.discourse.group/u/Sven)\
**Post date:** [April 2, 2020, 2:39pm UTC](https://wazo-platform.discourse.group/t/no-inbound-and-outbound-calls-trunk-connected/282/2 "2020-04-02T14:39:51Z")

</div>

Update:

> [@Web GUI : Adding trunks with inbound and outbound routes](https://wazo-platform.discourse.group/t/web-gui-adding-trunks-with-inbound-and-outbound-routes/125/10):
>
> If you’ve actually read this far, congratulations, you are a patient person. slight_smile So the issues were multiple in my case. In the Trunk setup, I had listed as my Host, the IP address of the Wazo server when in fact that is supposed to be the IP addres / FQDN of the trunk provider In the Trunk setup, I had used teh UserName/Password of the endpoint on the Wazo server when you are supposed to use the UserName/Password of the trunk provider In the Trunk setup - Register (tab) I had not…

I copied the settings but it did not resolve the issue.

I messed with the extensions, outcalls work now. It seems like the 0. extension does not fire for some reason.

I still dont get incalls, but they dont even register on the PBX, so I suspect, the incoming connection is broken rather than the routing within the PBX.

---

_[View the full topic](https://wazo-platform.discourse.group/t/no-inbound-and-outbound-calls-trunk-connected/282)._